Storing, Recalling, And Erasing Measurement Data - Invacare ISG4002654 Owner's Manual

Storing, recalling, and erasing
Storing data
•
*After each measurement, the systolic and diastolic rates,
pulse rate and the time & date will be automatically stored.
The memory holds data for the latest 30 measurements in
each of 3 zones. If more than 90 measurements are entered,
the memory will automatically clear out the oldest data.
• Recalling data
*Press the " " or " " button to select the memory zone.
*Press the "MEMORY" button to get your stored memory
data. If there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading
will be an average of the last three recorded set
of measurements (systolic and diastolic pressure
and pulse rate).
*Press the "MEMORY" button again and the lat-
est recorded set of measurements will appear
along with the recording time and date.
*Press the " " button to read the next set of stored data.
The data displayed starts with the most recent reading and
continues backwards to the oldest.
measurement data

Storing, recalling, and erasing measurement data

mmHg
mmHg
19