Adjustment Options; Adjusting The Angle Of The Backrest - Invacare Auriga User Manual

7

Adjustment Options

7.1

Adjusting the angle of the backrest

The backrest is held in place by a metal plate on each side. Each plate has 4 holes that are used to
set the backrest to different angles. This is done by selecting different combinations of holes.
Requirements:
• Allen key, 4 mm
•
Spanner, 10 mm
•
Remove the screws on both sides of the seat
that hold the backrest (1), using the spanner
and Allen key.
•
Adjust the backrest to the desired angle.
•
Reposition the screws and tighten.
28