Additionally, the seat height and angle can be adjusted
using the rear retaining plates.
•
Loosen the rear fixation bolt on one side (in
threaded bushing 1), so that the retaining plate can
be swiveled upward or downward.
•
Loosen and remove the front fixation bolt
(depending on the position, the bolt is either
located in threaded bushing 2 or 3).
•
Repeat the procedure on the other side.
•
Low adjustment = hole combination 1 and 2.
•
High adjustment = hole combination 1 and 3.
•
Re-position and tighten the screws.
43