Emergency Switch - Teac SR-L280i Owner's Manual

Stereo cd radio
Hide thumbs Also See for SR-L280i:
Table of Contents

Advertisement

Available languages

Available languages

MP3/WMA compatibility
This unit can play MP3/WMA files recorded on a CD-R,
CD-RW disc, or USB memory. Refer the instruction manual
of software when making an MP3 or a WMA file using a PC.
This unit can play back monaural and stereo MP3/WMA
files that are in the MPEG-1 Audio Layer 3 format with
a sampling rate of 44.1 or 48 kHz and a bit rate of 320
kbps or less.
The WMA file must be sampling rate 44.1 kHz, bit-rate
192 kbps or less.
This unit is not compatible with discs that have been
recorded using multiple sessions. Only the first session
can be played back.
This unit cannot play copyright protected files.
File information display
The display of this unit can only show single-byte letters
and numbers.
If a file information uses Japanese, Chinese or other
double-byte characters, playback is possible but the
name will not be shown correctly.
Cautions when preparing MP3/WMA files using a
computer or other device
Always include the extension in the file name. This unit
recognizes MP3 files by their ".mp3", WMA files by their
".wma" file extensions.
Always close the session (complete disc creation).
This unit cannot play discs if the session has not been
closed.
Carefully read the manual for the software that you are
using when you create an MP3/WMA disc.
Discs/USB memories that are unplayable or only
partially playable
Files without extensions cannot be played. Files that are
not in the MP3/WMA format cannot be played even if
they have extensions.
Variable bit rate files might not play back correctly.
If the disc has more than 999 files or 99 folders, this unit
can not play back correctly.
Depending on disc conditions, this unit might not be
able to play a disc or skipping might occur.

Emergency Switch

If the disc cannot be ejected, remove the disc by following
procedure.
1 During the power on, push the emergency switch (in
the hole) on the bottom of the unit.
The disc comes out.
2 Remove the disc.
If "EJECT ERROR" is displayed, unplug the power cord
from the outlet and plug it again.
After you remove the disc, if "No disc" is not displayed
press the eject button ( ) once to recover the unit.
The emergency switch does not work when the unit is
disconnected from the AC outlet.
7

Advertisement

Table of Contents
loading

Table of Contents