NEC SoundStation IP 7000 Quick Start Manual page 23

www.necunified.com. For detailed information on software compatibility for
Polycom HDX systems and SoundStation IP 7000 phones, see the
Administrator's Guide for the Polycom SoundPoint IP/SoundStation IP/VVX Family
available from www.necunified.com.
Before you set up your phone to connect to a Polycom HDX system, make sure
you have the optional Video Kit (containing a Polycom HDX Microphone
Cable). You use the Polycom HDX Microphone Cable to connect your phone
to the Polycom HDX system.
When you connect your phone to a Polycom HDX system, you do not need to
connect your phone to a power source (even if you want to attach Polycom
HDX Microphone Arrays to your phone). The Polycom HDX system provides
the power source.
To connect your phone to a Polycom HDX system:
Note You can only connect a single-phone setup to the Polycom HDX system. That is,
you cannot connect two phones together (using the Console Interconnect Cable),
and then connect the phones to a Polycom HDX system.
Connect your phone to the network:
1.
Note If you want to use a Multi-Interface Module (to access auxiliary audio connectors),
follow the steps for
Multi-Interface Module)
a Connect the 25-foot Network Cable to the LAN jack on your phone.
Connect the other end of the 25-foot Network Cable to an available
b
LAN port on the wall or hub/switch device port.
The following figure shows how to connect your phone to the
network.
Connecting Your Phone Using AC Power (One Phone, with
on page 1-5, and then go to step 2.
Setting Up Your Phone
1 - 15