Resetting To Factory Settings; Service Requirements - Mini CLUBMAN Owner's Manual

>
Fuel consumption: l/100 km, mpg,
*
km/l
>
Distance covered: mls, km
>
Time: 12h, 24h mode
>
Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
7. Press and hold the button until the display
changes.
8. Press the button briefly to change the for-
mat or unit of measure.
9. Press and hold the button until the display
changes.
The settings are stored.

Resetting to factory settings

The settings for formats and units of measure
can be reset to the factory settings. The settings
are stored for the remote control currently in
use, refer also to Personal Profile on page 18.
1. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
2. Press and hold the button until the display
changes.
3. Briefly press the button repeatedly until the
symbol and "SET" are displayed.
52
Online Edition for Part no. 01 41 2 604 449 - © 02/10 BMW AG
4. Press and hold the button until the display
changes.
5. Briefly press button repeatedly until "RESET"
is displayed.
6. Press and hold the button until the display
changes to the first setting.
The settings are reset.

Service requirements

The remaining driving distance and the date of
the next scheduled service are briefly displayed
immediately after you start the engine or switch
on the ignition.
The extent of service work required can be
read out from the remote control by your
MINI dealer.<