Resetting To Factory Settings - Mini Cooper Owner's Manual

Formats and units of
measure
To set the formats and units of measure. The set-
tings are stored for the remote control currently
in use, refer also to Personal Profile on page 20.
1. Switch on the ignition, refer to page 46.
2. Press the button on the turn signal indicator
as often as necessary until "SET/INFO" is
displayed.
3. Press and hold the button until the display
changes.
4. Press the button as often as necessary until
the symbol and "SET" are displayed.
5. Press and hold the button until the display
changes.
Online Edition for Part no. 01 40 2 607 490 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 490 - © 03/11 BMW AG
Controls overview
6. Press the button as often as necessary until
the indicated symbol is displayed, arrow.
>
Fuel consumption: l/100 km, mpg,
*
km/l
> Distance covered: miles, km
> Temperature: 7, 6
7. Press and hold the button until the display
changes.
8. Press the button to change the format or the
measurement units.
9. Press and hold the button until the display
changes.
The settings are stored.

Resetting to factory settings

The settings for formats and units of measure
can be reset to the factory settings. The settings
are stored for the remote control currently in
use, refer also to Personal Profile on page 20.
1. Press the button on the turn signal indicator
as often as necessary until SET/INFO" is
displayed.
2. Press and hold the button until the display
changes.
CONTROLS
61