Assembly Instructions - Uniflame GAD1001 Series Owner's Manual

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

Assembly Instructions

1
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have
your owner's manual and model number available for
reference.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a hard, level surface that does not have cracks
or openings.
• Clear an area large enough to lay out all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in "Operating Instructions" section)
• (1) Precision Filled LP Gas Grill Tank with Acme Type 1 external
threaded valve connection (4-5 gallon size)
Typical assembly: approximately 1 (one) hour.
3
Attach Bowl & Hearth Assembly
B
x 4
2
Attach Base and Side Panels
Note: Hole in base must face forward.
A
x 16
4
Attach Door
page no.
5