Assembly Instructions - Uniflame GAD860SP Owner's Manual

Assembly Instructions

1
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have your
owner's manual and serial number available for reference.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
• Clear an area large enough to layout all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in step Operations Section)
• (1) Precision Filled LP Gas Grill Tank with Acme Type 1 external
threaded valve connection (4-5 gallon size)
Note: You must follow all steps to properly assemble heater.
Typical assembly: approximately 1 (one) hour.
3
Attach LP Gas Tank Shield
A
x 4
LP Gas Outdoor Fireplace Model No. GAD860SP
2
Attach Bowl Assembly
A
x 4
4
Attach Side Panels, Back Legs and Middle Support Leg
A
x 12
B
x 3