Table of Contents
Advertisement
M3 Green
(
(MC-6300S / MC-6400S / MC-6500S)
6300 /
6 00 /
User Manual
Please read
"the safety guide"
before use and use it in a proper manner.
M3 Mobile Homepage
http://www.m3mobile.co.kr
h
//
All the information of user manual and programs in CD can be downloaded at
the M3mobile homepage.
6500 )
3
bil
k
Advertisement
Table of Contents
Related Manuals for M3 Mobile M3 Green MC-6300S
Summary of Contents for M3 Mobile M3 Green MC-6300S
-
Page 1: User Manual
M3 Green (MC-6300S / MC-6400S / MC-6500S) 6300 / 6 00 / 6500 ) User Manual Please read “the safety guide” before use and use it in a proper manner. M3 Mobile Homepage http://www.m3mobile.co.kr All the information of user manual and programs in CD can be downloaded at... -
Page 2: Note
The content of the manual is provided “as-is” and be subject to change at any time without notice. M3 Mobile Co., Ltd. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. -
Page 3: Copyright And Agreement
M3 products are distributed from our factories. M3 Mobile Corporation has the right to ask warranty of any programs to the program providers to meet the M3 Mobile Corporation has the right to ask warranty of any programs to the program providers to meet the needs of mobile networking companies. -
Page 4: Caution When Using M3
Contact responding suppliers directly for questions on applications and work programs other than – hardware and basic installed applications. Use supplied adapter and accessories by M3 Mobile Co Ltd Use supplied adapter and accessories by M3 Mobile Co. Ltd. –... - Page 5 Caution when using M3 (2) Do not reconstruct Do not reconstruct M3 for any purpose. – It may cause fire in the unit, and wound or electric shock to users. – Any defect caused by reconstructing units can not get warranty Any defect caused by reconstructing units, can not get warranty.
-
Page 6: Size And Features
Size and Features GSM 850 (TX) 824 ~ 849 MHz / (RX) 869 ~ 894 MHz GSM 900 (TX) 88 0 ~ 915 MHz / (RX) 925 ~ 960 MHz Used frequency band GSM 1800 (TX) 1710 ~ 1785 MHz / (RX) 1805 ~ 1880 MHz GSM 1900 (TX) 1850 ~ 1910 MHz / (RX) 1930 ~ 1990 MHz Band width... -
Page 7: Table Of Contents
Contents Note Screen Rotation Copyright and Agreement Infrared Communication BluetoothCommunication Caution when using M3 Function Key mode Size and Features Size and Features Transcriber/Keyboard 1. M3 Introduction 3. How to use internet Product Composition Name and function of each part Via GPRS/EDGE Input Button Input Button... - Page 8 Contents 8. Usage of Application and Utility programs 5. How to use the Phone Calculator/Image Viewer Init Screen MS-Backup Key Pad Menu Settings/Touch Protector Status icon/Display window Status icon/Display window Phone function Voice Conversation via Bluetooth SMS send and receive/Phone settings 6 Usage of Scanner/Camera 6.
-
Page 9: M3 Introduction
1. M3 Introduction 1. M3 Introduction 소 소 P d t C Product Composition 개 Name and Function of each part Input Button Soft/Hard Reset Soft/Hard Reset How to use Stylus pen LED Battery Attaching/Detaching Charging Charging How to connect to PC How to optimize Battery Longevity... -
Page 10: Product Composition
Product Composition (1) At the first time of opening the product box please check if it contains all the basic components At the first time of opening the product box, please check if it contains all the basic components, listed as following. M3 Green main terminal M3 Green main terminal Cradle + USB cable... - Page 11 The location of camera and the availability of Flash is depending on the model of M3. MC-6300S(Camera is located at Top-most, No Flash), MC-6400S(Camera is located at the rear of device, With Flash) MC-6500S(Camera is located at the rear of device, With Flash)
-
Page 12: Name And Function Of Each Part
Name and function of each part (MC-6300S) Charge Ramp(Left) Barcode Scanner Barcode Scanner Scanner Button B tt Scanner Ramp(Right-Right) Window CF/SD extension Camera Button Stylus Pen Slot Antenna Ear Mic Plug Function Key Camera Lens Battery Lock LCD touch Screen... - Page 13 Name and function of each part (MC-6400S) Charge Ramp(Left) CDMA Barcode Scanner Barcode Scanner Scanner Button B tt Ramp (Right-Left) Mini SD Window Camera Button Scanner Ramp(Right-Right) Extension Slot Stylus Pen Antenna Ear Mic Plug Function Key Flash Camera Mirror Camera Lens Battery Lock LCD touch Screen...
- Page 14 Name and function of each part (MC-6500S) Charge Ramp(Left) GSM/GPRS/EDGE Status Barcode Scanner Barcode Scanner Scanner Button B tt Ramp (Right-Left) Mini SD Window Camera Button Scanner Ramp(Right-Right) Extension Slot Stylus Pen Antenna Ear Mic Plug Function Key Flash Camera Mirror Camera Lens Battery Lock LCD touch Screen...
-
Page 15: Input Button
Input Button Button Action Function Button Action Function Click Software Reset Press Power ON/OFF Power button button Hardware Reset Hardware Reset Click again Click again Long press Backlight ON/OFF after long (long press of about 4 seconds and then Reset button press click one more time) Number... -
Page 16: Soft/Hard Reset
Soft/Hard Reset Soft Reset Hard Reset Press reset groove for more than 4 Press reset groove briefly as like – – seconds and the press it briefly one the picture. more time. For unexpected error occurred – For fatal problem with a device, and while using software, click reset –... -
Page 17: How To Use Stylus Pen
How to use Stylus Pen Double Click Long Press To drag To select items or executing, Similar function as mouse After tapping, leave Stylus Similar function as mouse tap the touch screen one double click function of pen touching the screen. This drag function of computer, time. -
Page 18: Led/Battery Attaching/Detaching
LED / Battery attaching/detaching LED Alarm Battery attaching/detaching Informs Charging, Scanner Status. Attaching Battery – – As picture shown, put the battery pack to back of PDA, Type LED Status Details and lock the battery pack with locking device. D t hi Detaching Battery B tt Charging... -
Page 19: Charging
Charging Charging in Cradle Charging in Cradle Connect plug in from charger to charge jack of main Connect plug-in from charger to charge jack of main body, or charge jack of cradle, and then place main Main body Charging LED body onto cradle. -
Page 20: How To Connect To Pc
How to connect to PC A cradle of M3 supports charging and USB connection. Connecting step of cradle of M3 is as following. Connect charger to USB cradle. (24pin connector) – Connect charger to power source (to wall) Connect charger to power source. (to wall) –... -
Page 21: How To Optimize Battery Longevity
How to optimize battery longevity When you work outside of office or at home, you will especially want your battery to last as long as possible. There are several tips for longer battery life When you are not using the device, turn it off by pressing LCD power button. -
Page 22: Basic Usage
2. Basic Usage 2. Basic Usage C l b Calibration Main window Screen Rotation Infrared Communication Bluetooth Communication Function Key Mode Transcriber/Keyboard... -
Page 23: Calibration
Calibration Choose ‘Recalibrate’ on Control Panel / Stylus / Calibration tab (Fn + 4) Screen setup wizard will start. Screen setup wizard calibrates the touch screen. Press and hold the (+) mark for more than 1 second and release it. Keep chasing and pressing this (+) mark as it moves around. -
Page 24: Main Window
Main Window (1) Main window consists of Desktop and Taskbar. In the background screen, you can see short cut icons of main programs. The details of icons are as follows: My Device : It displays the folders and files which the device contains. My Device : It displays the folders and files which the device contains. - Page 25 Main Window (2) The taskbar is designed to be simple and user- Status indication icon on the taskbar friendly. Icon Details Start icon is the starting point of program. Low Battery If you point the start menu with the stylus pen, you can If you point the start menu with the stylus pen, you can Battery in charging see various menus including program, favorites, document,...
-
Page 26: Screen Rotation
Screen Rotation Rotate the screen to different angle. With Screen rotation, screen can be rotated vertically or horizontally. Desktop screen is not applied with this function to get better rotation, set up the size of desktop screen better rotation, set up the size of desktop screen within 240 x 240 pixels. -
Page 27: Infrared Communication
Infrared Communication It carries out infrared communication using OBEX (Object Exchange Protocol). OBEX features provides an effective and simple binary protocol to exchange data in an efficient and convenient manner IrDA Communication Port M3 can communicate with desktop, notebook, pocket ith d kt PC as well as other PDA that has OBEX protocol for the IrDA communication. -
Page 28: Bluetoothcommunication
Bluetooth Communication (1) Bluetooth On/Off The user can on/off the power of Bluetooth (will be called as – ‘BT’ from now on) by selecting the Bluetooth Tray Icon. Switch to ON ( )/OFF ( ) by clicking BT ON/OFF on the –... - Page 29 Bluetooth Communication (2) Supported Service ActiveSync, File Transfer, Business Card Exchange, LAN Access, Generic – Serial, PAN Connection, Handsfree connection. Choose the service you want from the Bluetooth Manager and then start – connecting procedure. Generic Serial i S i l User can make a serial connection with other BT device that supports serial –...
-
Page 30: Function Key Mode Y
Function Key Mode If you press the down button on the left side, you can change the Function Mode. Pressing the Function key changes the state of Function – in turn (Disabled) (Enabled) (Hold-Enabled) – How to use the Function Key : Press 1~8 number keys on Function Enable or Hold –... -
Page 31: Transcriber/Keyboard
Transcriber/Keyboard (1) Transcriber When you want to key in characters in making document or – setting, start Transcriber. Using the stylus pen you can draw characters that you want on the screen. This program will recognize the characters by itself and transform them into typeface characters. - Page 32 Transcriber/Keyboard (2) Keyboard Upper/lower case Selection – Press this icon to change upper and lower case letter. If you select upper case, capital letter and its character will appear on the number key pad. It serves the same function with d It Shift key.
-
Page 33: How To Use Internet
3 How to use Internet 3. How to use Internet Via GPRS/EDGE Via Wireless LAN Via USB Via Bluetooth... -
Page 34: Via Gprs/Edge
Via GPRS/EDGE (1) How to set GPRS/EDGE Select the 4th icon (configuration menu) on the program – menu. On the Configuration menu, select EGPRS settings. – Insert setting values for desired network and click ok to save Insert setting values for desired network and click ok to save. –... - Page 35 Via GPRS/EDGE (2) How to connect the GPRS/EDGE manually Start / Settings / Network and Dial-up Connections or Control Panel / Network and Dial-up Connections. – Select make new Connection. Enter the name of connection. check dial-up connection, and press next. (ex. Make Name:GPRS) –...
-
Page 36: Via Wireless Lan
Via Wireless LAN You can connect to internet via Wireless LAN. Wireless LAN supports IEEE 802.11b and 802.11g. How to connect WLAN : Turn on the AP (Access Point) device which th AP (A P i t) d i hi h –... -
Page 37: Via Usb
Via USB Using internet via direct USB connection to PC This connection method is used at ‘PC connection’ menu – under control panel. Internet connection can be established by having a partnership with PC using USB ActiveSync. When you want to obtain upgraded program or file from internet, using USB connection can save the communication expense. -
Page 38: Via Bluetooth
Via Bluetooth Using internet via Bluetooth Please turn on the Bluetooth dongle on PC which has a – LAN service ability. Please turn on the Bluetooth and click the Bluetooth icon Please turn on the Bluetooth and click the Bluetooth icon –... -
Page 39: Activesync
4 Active Sync 4. Active Sync ActiveSync Introduction Installing ActiveSync Synchronization of Data ActiveSync Troubleshooting... -
Page 40: Activesync Introduction
ActiveSync Introduction Sync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop –... -
Page 41: Installing Activesync
Installing ActiveSync How to install ActiveSync Place Active Sync CD in CD Rom of desktop PC, installation will automatically executed. – When clicking [next] button, if [your device was not detected] sign is shown, then click [cancel] button. – Connect USB cable from cradle to computer USB port Then place M3 on cradle after turn the screen on Connect USB cable from cradle to computer USB port. -
Page 42: Synchronization Of Data
Synchronization of Data If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. “Sync Options” is a menu that you can select an item to synchronize. Contact, Appointments, Tasks, File, Channel, etc. -
Page 43: Activesync Troubleshooting
ActiveSync Troubleshooting When active Sync is not working Check the USB cable that connect the cradle and desktop PC if properly connected – Check if LCD and power is on – Open the windows by selecting [File>Connection Settings] of ActiveSync program Open the windows by selecting [File>Connection Settings] of ActiveSync program. -
Page 44: How To Use The Phone
5 How to use the Phone 5. How to use the Phone Init Screen Key Pad Status icon/display window... - Page 45 Init Screen Phone Main Screen PhoneBook It shows Phone Book Dialog. Call List It shows recently dialed and received call It h It shows received/Sent SMS and screen to i d/S t SMS PhoneBook write SMS. Time&Date Call List It manages settings for Phone and additional Configuration Call Status service.
- Page 46 Key Pad Key Pad It is sed to dial the n mbe and can be It is used to dial the number and can be used as speed-dial. It runs the Phone Program. It can Show and Hide the Phone Program. It inputs ‘*’, ‘#’...
-
Page 47: Status Icon/Display Window
Status icon/Display window Status Icon These are small icons which are located on the top of screen, indicating the state of Phone Program. – It indicates the signal strength (full state). It indicates that there is no signal. Ready to call or receive / on the phone. Bell state (Bell Vibration and Vibration &... -
Page 48: Phone Function
Phone function How to turn on/off t he p h one To turn on the phone – While phone is off, press the ‘End’ button for 2 to 3 seconds. The phone is on with initializing sound. To turn off the phone –... -
Page 49: Voice Conversation Via Bluetooth
Voice Conversation via Bluetooth Connecting with a Bluetooth Head set 1) Please set the Bluetooth Headset to Pairable mode. 2) Please do BT_ON and select BT Manager. 3) Select Hands free Connection and establish the connection to the Headset. Headset. Making a phone call via Bluetooth Head set 1) Please connect the Headset with Bluetooth device. -
Page 50: Sms Send And Receive/Phone Settings
SMS send and receive/Configuration To receive SMS When SMS is received, the received content will be displayed on the popped up window. – In order to check the received SMS, please go to the rec/sent list on the SMS menu and then select the –... -
Page 51: Usage Of Scanner/Camera
6 Usage of Scanner/Camera 6. Usage of Scanner/Camera How to use Scanner How to use Camera... -
Page 52: How To Use Scanner
How to use Scanner (1) Scanner Manual To scan the barcode, there are two scanner programs installed on the device M3 ScanTest M3 ScanTest It is a sample test program. It is only for testing the scanning feature of the device. It can not be used for business application. -
Page 53: How To Use Camera
How to use Scanner (2) M3 ScanTest This program is located under Flash Disk -> Scanner folder You need to select this tab to configure Settings – The Scanned Data will be displayed here – You can get the information like Firmware version, t th i f lik Fi –... - Page 54 How to use Scanner (3) ScanEmul When you run ScanEmul program, – you can see the program Icon is displayed on the tray bar. Using this icon, you can access to the various menus. – When you click the barcode icon, you will get This menu popped up. –...
- Page 55 How to use Scanner (4) ScanEmul You can set the Reading Option Sync: Scan Beam shoots until the Barcode is scanned or it’s timed out Async: Scan Beam Shoots while trigger Async: Scan Beam Shoots while trigger button is pressed or until it’s timed out. Security Level: number of times to check scanned data.
- Page 56 How to use Scanner (5) ScanEmul Here you can select the You can set the prefix and You can assign the button to use as a scan button. Symbology to enable. suffix which will be placed at start and end of barcode data.
- Page 57 How to use Scanner (6) How to use scanner Usage of 1D Scanner – Correct way Incorrect way Usage of 2D Scanner Usage of 2D Scanner – Correct way Incorrect way Scanner is optional. You can not use scan feature with no scanner enabled device. 2D Barcode Scanner is optional.
- Page 58 How to use Camera How to use the Camera demo program To turn on the camera – Run the program and press the ‘Start Preview’ button. To capture the image – You can take picture by pressing the ‘Capture’ button after pressing ‘Start Preview’...
-
Page 59: Usage Of Pims
7 Usage of Pims 7. Usage of Pims Today InfoBox SmartMemo SWRecoder... -
Page 60: Today
Today To get the Today window, select Start > Programs > Pims > Today. Today window displays the summarized information of user’s day schedule. Today – window consists of sound, time, date, schedule, task, user information and manage item. If you click each item, you can view and edit it. The explanation of each icon on Today window is as following: –... -
Page 61: Infobox
InfoBox (1) InfoBox lets user to manage appointment, task and contacts easily with one application. InfoBox provides the capability to add, edit and delete appointment, – anniversary, task and contacts. In InfoBox, you can vies appointment, anniversary and task daily, weekly and –... - Page 62 InfoBox (2) Task Add/Edit/Delete Task Add/Edit – In order to make a new task, tap on ‘InfoBox’ at the left bottom of InfoBox window or press the desired date for awhile and select ‘New Task’. You can also input a new task by pressing the Icon( on the tool bar and then press the icon( ) on the left-up side of task list.
- Page 63 InfoBox (3) Contacts Add/Edit/Delete Contacts Add/Edit – In order to make a new contact, tap on ‘InfoBox’ at the left bottom of InfoBox window and select ‘New Contacts’. You can also input a new contacts by pressing the icon( ) on the tool bar and then press the icon( ) on the left-up side of contact list.
- Page 64 InfoBox (4) Toolbar Anniversary display Month display/change Display be category Year display/change Return to current date Appointment display Move page Task display Display by category Display by category Year display / change Year display / change – – When this button is pressed, the appointment, anniversary, task data will You can change the year by selecting it from the list (if you press be displayer by category on daily/weekly/monthly list.
- Page 65 InfoBox (5) Daily view When daily view is selected, the relevant appointment, – anniversary and task on that day will be displayed. Appointment, Anniversary and Task will be displayed on the – list with white, gray and blue ground respectively. Weekly view When weekly view is selected, the relevant appointment, –...
-
Page 66: Smartmemo
SmartMemo (1) Settings Category – Using menus above the window, you can create, edit and delete the category. Using the left-up menu, you can either create new main category or delete existing main category (by long press of the category name). On each main category (except ‘No category’), you can create a sub Category setting Menu category using ‘create’... - Page 67 Smart Memo (2) Memo Menu (Continue from previous page) Mode Change – If you press the left-down pen icon( ), you can choose the mode. Opaque/Transparent pen Partial/Total erase Erase current page Mode change menu Delete current page D l t Delete entire memo Save and Exit Alarm setting...
- Page 68 Smart Memo (3) Writing a Memo / Memo List How to write a memo – On the new memo page, you can write a memo using stylus pen. Memo List – On the memo list you can check the saved date and the number of pages On the memo list, you can check the saved date and the number of pages.
-
Page 69: Swrecoder
SWRecoder (1) Settings Tool bar – Play Stop Pause Record Status Status Time Option Menu Forward, Backward Forward, Backward Progress bar Progress bar On the toolbar, you can play, stop, record, forward, backward and move. If you press the option menu, you can set the channel and sample rate. - Page 70 SWRecoder (2) Settings (Continue from previous page) Saving / Sorting – You can save the recorded data to My Documents, Flash Disk, SD MMC Card, and CF Card. The data will be saved as ‘ave’ file under Voice Memo folder on the relevant saving path Voice Memo folder on the relevant saving path.
-
Page 71: Usage Of Application And Utility Programs
8 Usage of Application and Utility programs 8. Usage of Application and Utility programs Calculator Image Viewer MS-Backup Menu Settings Touch Protector... -
Page 72: Calculator/Image Viewer
Calculator/Image Viewer Calculator M3 offers a calculator application. Using this – application you can do a simple calculation. To run the calculator, select Go to start > – Programs > Application > Calculator. Image Viewer You can see the image file using the image viewer You can see the image file using the image viewer. -
Page 73: Ms-Backup
MS-Backup Backup How to set the saving location and name. – Under the Backup tap On the Backup Manager window, you can assign the saving location to Flash Disk, SD MMC Card and CF Card. In the Name box, you can input the backup name to save with. You can check the latest backup date under the ‘Last Backup Date’... -
Page 74: Menu Settings/Touch Protector G
Menu Settings/Touch Protector Menu Settings In the Menu, you can select the programs to be included – in the favorites. The installed programs will automatically appear on the y pp – program list. Check the check box of the program to be added.