Page 2
PACKAGE ▪ Please check all items below are included in package box. < M3 SM10> < Battery > < Adaptor > < Micro-USB Cable > Warning ※ Use of controls or adjustments or performance of procedures other than those speci ed herein may result in hazardous radiation exposure.
Page 3
FEATURES DEVICE Receiver Back Button Scanner Button Volume Button Camera Ear Jack Hole 3. Screen Scanner Button Power Button Function Button Micro-USB Connector Scan Window Sensor Microphone Camera Charging LED 6. Menu Button Speaker 7. Charging Contacts Battery Cover Home Button Camera Button...
FEATURES KEYPAD Button • Button Description Scanner Operate the scanner while executing the scanner program. Volume High Increase the volume. Volume Low Decrease the volume. Camera Take pictures while executing the camera program. Back Return to the previous stage. Home Go to the Home screen.
RESET SOFT RESET (1) Press and hold the Power button to display the power management menu. Select the “Power O and Restart” menu. SOFT RESET (2) If the device stops its operation for a long time, press the Volume Down button + the Back button + the Camera button to perform soft reset.
• Either the front or back of the SIM card can be connected to the dual slot. 아래 위 ONLY SIM Card Inserting an External Memory Card The Micro-SD card is used as an external memory of M3 SM10. • After removing the battery, insert the SD memory card into the Micro-SD card slot. Micro-SD Card...
DEVICE SETUP BATTERY Inserting the Battery • Insert the battery from the bottom in the right direction. • After inserting the battery, slide the Slide button to the left to x the locking device. Removing the Battery Caution ※ ▪ If an unapproved battery is used, it may explode.
Description LED Color Battery is being charged. Green Battery is fully charged. Caution ※ Use only an M3 Mobile-approved adaptor. If not, the device may malfunction or be damaged during or after its charging, or the battery performance may degrade.
DATA CAPTURE SCANNER Place the device toward to the barcode desired, and press the Scan button. • The laser beam of the scanner should completely cover the bar code as shown in the following. <1D Scanner> <2D Scanner> Warning ※ Do not look at the laser beam directly.
• Hold the M3 SM10 as shown below. Do not cover the antenna area of the battery cover with your hands. • Place the M3 SM10 near the NFC chip or tag card until the data transfer is completed. (Generally, data is displayed in the application.)
The M3 Mobile can distribute a new OS to improve the quality and performance of a product. The latest OS is described in the online support page of M3 Mobile. The OS of M3 SM10 can be updated through two methods: i.