Wireless Security; Wireless Security - Disabled - EnGenius 11b/g Wireless SOHO Router User Manual

11b/g Wireless SOHO Router
Preamble Type: Select a long or short preamble type. For best performance, it is
recommended that the preamble type of the AP matches that of the client.
Broadcast SSID: Select Enable or Disable. This is the SSID broadcast feature. If
you set this value to Visible, then the clients will be able to find this SSID on a site
survey.
IAPP: This is the Inter Access Point Protocol which simplifies roaming between
Access Points. If you have setup several Access Point or a WDS system, it is
recommended to Enable this feature.
802.11g protection: If your network includes 11g and 11b clients, it's recommended
to enable the feature as this will enhance the throughput rate in a mixed mode.
User Isolation: Select Enable or Disable. This is a security feature that will isolate
every client device that is associated with the device. One client device will not be
able to view the other client device in a network neighborhood. If used in a public
area such as a coffee shop, it is recommended to enable this feature in order to
protect the privacy of the client devices.
RF Output Power: You may control the output power of the device by selecting a
value. This feature can be helpful in restricting the coverage area of the wireless
network.
Click on the Apply Change to save the changes.

3.4.3 Wireless Security

To protect your privacy this mode supports several types of wireless security: WEP
WPA, WPA2, and WPA-Mixed. WEP is the original wireless encryption standard.
WPA provides a higher level of security. The following section describes the security
configuration in detail.

3.4.3.1 Wireless Security - Disabled

.
Version 1.0
29