Wan Settings - Pptp - EnGenius 11b/g Wireless SOHO Router User Manual

11b/g Wireless SOHO Router Version 1.0
Clone MAC Address: Specify a MAC address if you would like to use a different
MAC address on this device. (optional)
Enable uPNP: Place a check in this box to enable UPnP. It is recommended to
enable this feature as it's used by several applications.
Enable PING Access on WAN: Place a check in this box if you would like the device
to be pinged from the WAN side (ISP).
Enable Web Sever Access on WAN: Place a check in this box if the static IP
address if used for a web-server.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of IPsec packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of PPTP packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of L2TP packets on a VPN connection.
Click on the Apply Change to save the changes.
3.3.6 WAN Settings – PPTP
Click on the WAN link on the navigation drop-down menu. This feature allows you to
configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.
WAN Access Type: Select PPTP from the drop-down list. This type of connection is
used when your ISP has provided you a dedicated IP address.
IP Address: Enter an IP address for this device, which is assigned by your ISP.
25