Grundig GLCD1908HDV User Manual page 42

TV
Issue
No power
No picture
No sound
Color distortion
Remote control
is not responding
Screen glittering
under PC mode
Screen traversed
under PC mode
Solution
Turn off the unit on the remote and at the wall
socket. Pull out the power plug. Wait 60 seconds and
then plug the power cord back in turn the power and
unit back on.
Check that your cables and antenna have been
connected firmly.
Check that your DVD Setup Audio Settings are
correct.
Conduct a restore setting to return settings back to
the factory default and clear any incorrect settings.
Check that your audio cables have been connected
firmly.
Check that the Mute setting is not on and that your
DVD Setup Audio Settings are correct.
Conduct a restore setting to return settings back to
the factory default and clear any incorrect setting.
Ensure that the equipment is connected properly.
Ensure that the AV video signal input is connected
properly.
Make sure there are no obstacles in the way of the
remote control and the sensor.
Check the batteries, as they may need to be
changed.
Move closer to the remote sensor.
Reset the computer and enter into the safety mode,
then select the appropriate screen type by consulting
the PC operation manual.
The phase is not appropriate. Enter into the PC
setting and change to correct level.
- 41 -