Related Manuals for Grundig GLCD1906HDV Series
Summary of Contents for Grundig GLCD1906HDV Series
- Page 1 MISURO HD LCD TV WITH DVD PLAYER GLCD1906HDV Series GLCD2206HDV Series The Gold Technical Support Line: 1902 215 259 Personal Product Support (Charges will apply at $2.95 per minute)
-
Page 2: Introduction
Introduction Thank you for buying this Grundig product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarize you with the unit’s many features and to ensure you get the very best from your purchase. -
Page 3: Table Of Contents
Contents Introduction …………………………………..….………1 Safety Instructions ……………………………………...3 Unpacking ………………………………………..…..…5 Wall Mount Bracket Installation Guidelines ……..……6 View of TV/Monitor ………..………………………….…7 Remote Control …………………..………………….…… 9 Installation and Connection …………….…………..…….12 TV/Monitor Screen Operation …….……………………13 TV Channel Menu and Adjustment …….……….….….15 DVD Player Operation ….……………..…………………25 Other Operation ….……………………………………..35 Notes …………….……………………………………….38 Maintenance …….………………………………………39... -
Page 4: Safety Instructions
Safety instructions 1. Do not use this apparatus near water. 2. Clean only with a dry cloth. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 5 Installation notes This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other power supply. Locate the TV in the room where light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
-
Page 6: Unpacking
Unpacking ___________________________________________ Please make sure that the following items are included with your LCD TV/Monitor. If any item is missing, please contact the warranty line. Remote control DC adaptor RCA cable Wall Mount Bracket Installation Guidelines TFT LCD TV/ Monitor Operation manual Power cord Car Cord... -
Page 7: View Of Tv/Monitor
____________________________________________ Place the “LCD TV” on a solid surface. Use soft material to place over the front screen to avoid any damage. Remove the 5 screws ( stand (Refer picture 1). Using the plastic cover that came with the LCD screw in the 5 screws to fix the plastic cover on the bottom of the unit (Refer picture 2). -
Page 8: Back View
Use only the adaptor type NU60-2120500-I1 Other adaptor may damage the unit N14119 Grundig Warranty: 1800 509 394 Australia MADE IN PRC Grundig Warranty: 0800 450 259 New Zealand CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT 2008/05... - Page 9 Power button / power indicator To switch on/off the unit, in power on mode the indicator will turn to blue and in standby mode the indicator will turn to red. PLAY/PAUSE button To play/pause playback of disc. STOP button To stop playback of disc. EJECT/CLOSE button To eject a disc from the disc slot or close a disc to the disc slot.
-
Page 10: Remote Control
II. Remote Control... - Page 11 (1) Remote control keys function 1. STANDBY: To switch on/off the unit. 2. Numeric buttons: To select a channel by number input or input numbers in menus. 3. CH.LIST: To show the channel list and used to input the track number for discs that have more than 9 tracks.
- Page 12 (2) Remote control battery installation and cautions Replace battery by following the below steps: Requires two AAA batteries. Open the battery cover as shown below: Install the battery into the battery tray. Close the battery cover Caution: 1. Keep batteries out of children’s reach. 2.
-
Page 13: Installation And Connection
Use only the adaptor type NU60-2120500-I1 Other adaptor may damage the unit N14119 MADE IN PRC Grundig Warranty: 1800 509 394 Australia Grundig Warranty: 0800 450 259 New Zealand CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT 2008/03... -
Page 14: Tv/Monitor Screen Operation
2. Connect the audio sources (Including DVD, VCDR, etc.) to the proper AUDIO input jacks ‘L’ and ‘R’. 3. Connect the video source to the VIDEO input jack by RCA cable. 4. Connect the video source to the S-VIDEO input jack of the TV by the S-video cable 5. - Page 15 Channel ‘1’ will appear on the left top corner of the screen after the channel scanning is finished. Press the CH- or CH+ button to select the previous or next channels or press the 0-9 buttons to enter a channel number directly.
-
Page 16: Tv Channel Menu And Adjustment
Press the TEXT button to enter TELETEXT mode, press the TEXT button again to exit. Press the CH- or CH+ button to select the previous page or press the 0-9 numeric buttons for the next page. Note: The first number should not be ‘0’ or ‘9’. Refer to the chapter of ‘Remote Control’... - Page 17 DTV Manual tuning - Press to select the channel, then press ENTER to start scan. ATV manual tuning...
- Page 18 - Press the button to select the items, and press the Adjust. See details in the following sub-options. - Press the ENTER button to confirm and press the LCD MENU button to Return to previous menu or press the EXIT button to exit. Storage To Press the button to select the channel number you want to save to.
-
Page 19: Picture Menu
- Press the button to select the channel. Delete Press red button, DELETE mark will be shown on the current channel; Press red button again, the current program will be deleted. Rename Press green button, RENAME mark will be shown on the current channel; then move cursor by last press LCD MENU button to confirm this operation and return to previous menu. - Page 20 - Press the LCD MENU button to display the OSD menu then press the button to select PICTURE menu. - Press the button to select the items in PICTURE menu, press the button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit.
-
Page 21: Sound Menu
Press the button to turn the Noise Reduction function on or off SOUND menu - Press the LCD MENU button to display the OSD menu then press the button to select SOUND menu. - Press the button to select the items in SOUND menu, press the button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit. -
Page 22: Time Menu
TIME menu - Press the LCD MENU button to display the OSD menu, then press the button to select TIME menu. - Press the button to select the items in TIME menu, press the button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit. -
Page 23: Option Menu
Auto sleep Press the button to select on or off. turn to standby mode automatically if there is no signal input for a period of about 5 minutes. Time Zone Press the button to set the time zone. OPTION menu - Press the LCD MENU button to display the OSD menu then press the button to select OPTION... -
Page 24: Lock Menu
To show the country you have set when you started auto scan. Restore Setting Press the button to restore; this operation will reset the unit to factory default. LOCK menu - Press the LCD MENU button to display the OSD menu then press the button to select LOCK menu. -
Page 25: Epg Menu
icon will disappear. Parental Guidance Press the button to set program rating to block some of programs. Hotel Mode Press the ENTER or button to select the related item, and set by EPG menu The EPG (Electronic Programme Guide) menu is used to look at what is being broadcast on a DTV or Radio channel at a later point in time. -
Page 26: Dvd Player Operation
To see what is going to be broadcast after the current programme, press the button to change the time and press the To view a different channel, press the program for later watching, press the blue button to enter setting menu. Press the green button to enter the schedule list. - Page 27 Press the PLAY/PAUSE button once during playback. Press the PLAY/PAUSE button again to resume normal playback. HOW TO REMOVE THE DISC Press the button on the remote control. Wait until the disc is completely ejected before removing. HOW TO STOP PLAYBACK Press the STOP button once, the DVD video player will stop.
- Page 28 You can use the REPEAT button to repeat the play of various sections of your DVD. Press the REPEAT button once to repeat playing the present chapter. Press the REPEAT button again to repeat playing the present title. Press the REPEAT button third time to repeat playing the whole disc. Press the REPEAT button for the fourth time to cancel repeat play and return to normal play.
- Page 29 ENTER button to play from the first chapter of selected title. h. INFO During playback, press the D.DISP button on the remote control to show the current information available. The following information will appear - Title Elapsed; Title Remain; Ch. Elapsed; Ch. Remain; Display Off and so on. Note: For different discs, D.DISP button may have a different function.
- Page 30 For different discs, PROG button may have a different function. If you press the STOP button once the DVD video player will stop. At this point, press the ENTER button to re-start the disc from the same point. If you press the STOP button twice the program playing will be cancelled.
- Page 31 l. Selecting languages This DVD video player allows you to select preferred languages which are included on the Multi-languages DVD discs. By Pressing the LANG button once during playback to display current language, press the LANG button again to toggle between different language modes in sequence.
- Page 32 view the corresponding pictures. n. INTRO playback Press the INTRO button to play the first 10 seconds of each track when playing CD discs. o. Customizing the Function Settings This DVD video player allows you to customise the performance to your personal preference.
- Page 33 This menu enables you to select one of the three aspect ratios: 4:3 PS / 4:3LB / 16:9 4:3PS(Normal) Normal Pan and Scan is used for most normal television broadcasts. It has an aspect ratio of 4:3. Choose this setting when viewing the movies, the picture will fill the screen but left and right edges of the picture may be cut off from the screen.
- Page 34 PASSWORD This is used to lock and unlock the RATING setting. The default setting is locked. Enter the default password”0000” by numeric buttons, and then press ENTER button to unlock. To change the password just input 4 digits you want in unlock mode. RATING You could set the rating options according to your preference.
- Page 35 Press the select the LANGUAGE setup icon, press ENTER button to confirm. You could choose the available languages as displayed on the screen menu. Note: Audio languages, Subtitle languages and Menu languages are DVD discs specified. 3. Audio Setup AIDIO OUTPUT Press the select the AUDIO OUT setup icon, press ENTER button to confirm.
-
Page 36: Other Operation
TONE Press the adjust the Tone setting. 4. Digital Setup DYNAMIC RANGE Press the adjust the compression ratio for different audio effect, When selected FULL, the peak signal value is smallest; When selected OFF, the peak signal value is biggest. DUAL MONO Press the select 4 different audio output... -
Page 37: Trouble Shooting
Trouble Shooting Should the unit not function, please check the following table to find out the possible problem. If you still can not solve the problem, please contact the Grundig Warranty line. a. DVD player SYMPTOM Wrong connection or loose No sound connection;... -
Page 38: Notes
Symptom Remedy 1. Check whether the power plug is connected to the power No power supply. 2. Pull out the plug and wait for 60 seconds, and then insert the power plug again and switch on the TV/monitor. No picture No sound Color distortion Picture/sound... -
Page 39: Maintenance
(2) When you want to cut off the electricity supply to the unit, please press the STANDBY button on the unit, then take out the plug from the wall outlet. (3) Don’t press any buttons if you are not using the unit. Set the STANDBY button to “OFF”, and take out the batteries from the remote control if the unit is not being used for a long period of time. -
Page 40: Specifications
use a solution containing alcohol, spirits, ammonia or abrasives. 2). Cleaning discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre outwards. Do not use solvents such as benzine, thinners, commercially available cleaners or antistatic spray intended for analogue records. - Page 41 OFDM Mod.: 2K, 8K FFT, SFN and MFN Packed Carries: 2K/8K Guard Interval: 1/4, 1/8, 1/16, 1/32 Integrated and frequency synthesis X 1 ( CVBS) 2 X 3W (rms) 8.6 Kgs DC 12V 5A, AC110~240V, 50Hz/60Hz Max 60W GLCD1906HDV/GLCD1906HDVW 19 inch 16:9 1440*900...
-
Page 42: Display Modes
Contrast Brightness Display colours View angle Response time TV system DTV decode DTV de-mod. Tuner Compatible with CD/MP3/WMA/JPEG/VCD/DVD formats Coaxial Video S-Video Terminals HDMI Audio L/R YPbPr Audio output Gross weight Power supply Power Consumption * Design and specifications are subject to change without prior notice. XI. -
Page 43: Warranty
640x480(VGA) 800x600(SVGA) 800x600(SVGA) 800x600(SVGA) 1024x768(XGA) 1024x768(XGA) 1024x768(XGA) 1280x1024(SXGA) 1280x1024(SXGA) 1. Modes, which are not listed in the above table, may not be supported. For an optimal picture it is recommended to choose a mode listed in the table. 2. You have 13 available modes compatible with windows. 3. - Page 44 In the unlikely event that your product fails to work normally, please contact Grundig Warranty on 1800 509 394 (Australia) or 0800 450 259 (New Zealand) and have your receipt of purchase on hand. This guarantee is subject to the following provisions: It is only valid within boundaries of the country of purchase;...
- Page 45 PO BOX 6287 Silverwater NSW 1811 www.grundig.net.au Ver. 5 13-AUGUST-2009...