Grundig GLCD1908HDV User Manual page 13

Remote Control Battery Installation
Replace battery by following the below steps:
The remote control requires two AAA batteries.
1. Open the battery cover as shown below:
2. Install the batteries into the battery tray.
3. Close the battery cover
Caution:
1. Keep the batteries out of the reach of children.
2. Don‟t attempt to recharge, short-circuit, disassemble, heat up or throw
batteries into a fire.
3. Always replace both batteries at the same time. Never mix new and old
batteries or batteries of a different type.
4. If you don‟t intend to use the remote control for an extended period,
remove the batteries to prevent possible leakage and corrosion.
Notes:
1. Do not drop, shake or step on the remote control.
2. Do not spill water on the remote control.
3. Aim the remote control directly at the remote sensor, for best use.
4. If the TV does not operate when operating the remote control from a
close range, you need to replace the batteries.
- 12 -