Cruise Control System - Yamaha Venture XVZ13TF Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button. If you do not
reset the fuel reserve tripmeter manu-
ally, it will reset itself automatically and
the display will return to "TRIP 1" after
refueling and traveling 5 km (3 mi).
3
NOTE:
_
After resetting the fuel reserve tripme-
ter, the display will return to "TRIP 1",
unless a different mode had been pre-
viously selected; in that case, the dis-
play automatically returns to the prior
mode.
_
Clock mode
To change the display to the clock
mode, push both the "SELECT" and
"RESET" buttons.
To change the display back to the
odometer modes, push the "SELECT"
button.
To set the clock:
1. Push both the "SELECT" and "RE-
SET" buttons for at least two sec-
onds.
2. When the hour digits start flashing,
push the "RESET" button to set
the hours.
3. Push the "SELECT" button, and
the minute digits will start flashing.
4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button to start
the clock.
NOTE:
_
After setting the clock, be sure to push
the "SELECT" button before turning the
key to "OFF", otherwise the clock will
not be set.
_
3-5
1. "CRUISE" switch

Cruise control system

This motorcycle is equipped with a
cruise control system designed to
maintain a set traveling speed.
Activating and setting the cruise
control system
The cruise control system can only be
activated when riding in 4th or 5th gear
at speeds between 30 mi/h (50 km/h)
and 80 mi/h (130 km/h).
EAU04037