SOYO SY-K7VTA-B User Manual page 71

BIOS Setup Utility
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-5.1 IDE Device Controls
IDE Controls
On-Chip PCI IDE
Ø Primary
Ø Secondary
IDE Prefetch Mode
IDE
Ø
Primary Master PIO
Ø
Primary Slave PIO
Ø
Secondary Master PIO
Ø
Secondary Slave PIO
IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
3-5.2 Keyboard Controls
Keyboard Controls Setting Description
Init Display First
Setting Description
Disabled Turn off the on-board IDE
Enabled Use the on-board IDE
Disabled The onboard IDE drive
interfaces supports IDE
Enabled
prefetching for faster drive
accesses. If you install a
primary and/or secondary
add-in IDE interface, set this
field to Disabled if the
interface does not support
prefetching.
mode 0-4 0 is the slowest speed
4 is the fastest speed
Auto For better performance and
stability, we suggest you use
the Auto setting to set the
HDD control timing.
Disabled
Auto Select Auto to enable Ultra
DMA Mode support.
PCI Slot Choose which card – AGP
Display card or PCI VGA card –
AGP
to initialize first.
67
SY-K7VTA-B
Note
Default
Default
Default
Default
Note
Default