Download Print this page

Laser Warning Labels; Operation - American DJ Micro 3D User Instructions

Advertisement

Micro 3D
American DJ
- www.americandj.com - Micro 3D Instruction Manual Page 7
©
®

Laser Warning Labels

LASER RADIATION
IS EMITTED FROM
THIS APERTURE
AVOID EXPOSURE
40mm
41 mm
LASER RADIATION AVOID
DIRECT EYE EXPOSURE
Maximum output <5 mW
Wavelength: 650, 532nm
Class IIIa laser product
This device complies with 21 CFR chapter I,
Subchapter J, or CFR 1040.10 and 1040.11
40mm
American DJ Supply,Inc.
6122 S.Eastern Ave.
Los Angeles. CA 90040 USA
Manufactured:
Specification stickers
40mm
CAUTI ON - CLASS 3R
LASER RADIATION WHEN OPEN
AVOID DIRECT EYE EXPOSURE
Micro 3D
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Operating Modes: The Micro 3D has 2 operating modes;
sound active mode and auto mode.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Auto Play -
This function run automatically run through all of units patterns.
Sound Active Mode:
This mode allows the unit to run to the beat of
the music.
1. Press the Auto/Sound button
if the red LED on the front of the unit flashes and every
movement.
Auto Play:
This mode allows the unit to run Auto Play.
1. Press the Auto/Sound button
unit stays on. You are now in Auto Play.
2.
Use the speed knob underneath the button to control the speed
of the program.
Remote Control:
Use the included remote to control various func-
tions. Please see below for button control.
Note: This remote control code has been set for this laser, so that
the laser can be controlled out of the box. If this code happens to get
erased the remote will not work with the unit. Please see the next page
to reset the code and link the laser to the remote again.
A Button - Use this button to switch between Auto Play and Sound
Active.
B Button - Use this button to Blackout the unit.
C Button - Use this button to select colors. Either red, green, or red &
green.
D Button - Use this button to select your desired rotation.
American DJ
- www.americandj.com - Micro 3D Instruction Manual Page 8
©
®

Operation

. You are in sound active mode
till the red LED on the front of the

Advertisement

loading