Basic Setup And Configuration; General Functions - Headset; General Functions - Speakerphone; Software Upgrade Option - Cardo Systems scala rider G4 User Manual

4. BASIC SETUP AND CONFIGURATION

4.1 GENERAL FUNCTIONS – HEADSET
DESIRED RESULT
Turn on the headset
Turn off the headset
Distinguish between
the Instructor and
Trainee's units
Increase the volume
Decrease the volume
Mute the Headset
Battery Level Indica-
tor (Headset)
* Refers to the scala rider G4 Instructor Kit package for 2 trainees
6 scala rider ® G4 Instructor Kit
™
REQUIRED ACTION
Press the Control Button steadily for at least
four seconds
LED indication: Three blue flashes.
Audio feedback: Ascending tone (low-high).
Press the Control Button steadily for at least
three seconds
LED indication: Three red flashes.
Audio feedback: Descending tone
(high-low).
After turning on the headsets and receiving
an LED indication of 3 blue flashes, each
headset will display a constant light for 2
seconds as follows:
Blue and Red one simultaneous flash – In-
structor's headset
Blue and Red two simultaneous flashes –
Trainee 1 headset
Blue and Red three simultaneous flashes –
Trainee 2 headset*
Tap the Volume Up Button
Tap the Volume Down Button
Tap simultaneously Volume Up and Volume
Down while audio is on
Press and hold the Volume Up Button for
three seconds
Blue light = Battery is fully charged
Red/blue light = Battery is half full
Red light = Battery is almost empty
4.2 GENERAL FUNCTIONS – SPEAKERPHONE
DESIRED RESULT REQUIRED ACTION
Turn on the Press and hold the Control Button steadily
speakerphone for at least six seconds
LED indication: Five rapid blue flashes
Turn off the Press and hold the Control Button steadily
speakerphone for at least six seconds
LED indication: Five rapid red flashes
Increase the Speaker- Tap the Volume Up Button
phone Volume
Decrease the Speak-
Tap the Volume Down Button
erphone Volume
Mute the Speaker- Tap the Mute Button
phone's microphone
LED indication: solid red light

4.3 SOFTWARE UPGRADE OPTION

In the future you will be able to install
software upgrades and program patches
to keep the software of your Instructor and
Trainee headsets up-to-date. To ensure that
you don't miss out on the latest versions, please register online
at www. cardosystems.com/download/softwareupgrade
and have your serial number ready. For downloading upgrades,
please use the USB cable included in the retail package of your
scala rider G4 Instructor Kit and follow the Instructions.
Please note that until further notice, upgrades will only be
available for Windows® based computers with 32bit Windows
XP™, Windows 7 or Vista™ operating systems.