Projection Modes - Epson PowerLite 900 User Manual

1 Computer port sources
2 Video and HDMI sources
3 USB port sources (computer display and external devices)
4 Network source
4. If you see a blank screen or a "No Signal" message, try the following:
• Check that the device cables are securely connected to the projector and the device.
• Make sure the projector is turned on and its lens cover is open.
• For laptop computers, make sure you have set up your laptop to output its display properly.
Parent topic:

Projection Modes

Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
• Front (default setting) lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and the
rear.
You can change the projection mode using the remote control or by changing a menu setting.
Using Basic Projector Features
74