Additional Features; Diagnostics; Data Logging - Edge Products Evo HT User Manual

O P E R A T I N G I N S T R U C T I O N S

DIAGNOSTICS

Use the Engine Diagnostic Tool to
check trouble codes. A Diagnostic
Trouble Code (DTC) arises when a ve-
hicle's computer detects a sensor fail-
ure or a parameter outside a specifi c
range. Most vehicles will illuminate
the in-dash check engine light. An HT
programmer will read, identify and let
you clear DTCs.
READ DTC
1. Plug your programmer into the
OBD-II port.
2. Use the diagnostic tool to read the
DTC from the vehicle's computer. If
a code is present, it will be displayed
with a full text description.
CLEAR DTC
If your vehicle displays a DTC, an
Edge Products programmer can clear
the code, turning off your check en-
gine light.
(NOTE: If a DTC persists, this could
indicate a vehicle malfunction or
problem. Be sure to return the vehicle
to stock prior to taking it in for ser-
vice to address the issue.)

DATA LOGGING

With the Data Logging options, you
can compare the stock vs. pro-
grammed performance of your vehicle.
LOG BY SPEED OPTION
This option allows you to test and log
the time it takes to reach a pre-defi ned
speed. The HT stores your Best Times
as well as your Last Run information.
12
A D D I T I O N A L A D D I T I O N A L F E A T U R E S F E A T U R E S
LOG BY DISTANCE
This option allows you to test and log
the time it takes to reach a pre-defi ned
distance. The HT stores your best
Times as well as you Last Run infor-
mation.
ADVANCED
Use these options to monitor and
record individual live sensor values
or computer data. Specifi c features
for your vehicle will automatically be
available once the HT has identifi ed
your vehicle. You are allowed to moni-
tor (4) different parameters at one time.
1. Choose (4) of the provided param-
eters that you would like to monitor.
These parameters will be available
under the "Engine Misc", "Time and
Distance", and vehicle specifi c options.
These options may be available, but
are not limited to:
•Air and fuel data
•Mass air fl ow rates and temp.
•Ignition timing
•Injector fuel rates
•Direct sensor information
•Monitor fl uid temperatures
•View live powertrain data
2. Return to the Data Logging menu
by pressing "Left" and choose "Start
Display".
A screen divided into 4 portions will
appear. These are the parameters that
you had specifi ed in step 1.