Base Settings; Base Ringer Volume; Base Ringer Melody; Change Base Pin Code - Motorola D4 User Manual

6. Base settings

6.1

Base ringer volume

Choose from 5 volume levels or Off.
m d
1. Press , scroll
BASE VOLUME
The display shows
m
2. Press .
u d
3. Press or to select the volume (1 - 5 or
m
4. Press to confirm or
menu.
6.2

Base ringer melody

Choose from 5 different base ringer melodies.
You will hear a sample ring as you scroll to each ringer
melody.
m d
1. Press , scroll
d
BASE MELODY
2. Scroll to
u d
3. Press or to select the ringer melody (1 - 5).
m
4. Press to confirm or
menu.
Base settings
m
SETUP
to and press .
.
OFF
n
to return to the previous
m
SETUP
to and press .
m
and press .
n
to return to the previous
6.3

Change base PIN code

Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings. The
default PIN is 0000. You can change this to your own
preferred number.
When you enter a PIN, the digits are shown as ****.
m
1. Press
d
2. Scroll to
).
3. Enter the 4 digit PIN code (default = 0000) and press
4. Re-enter the new PIN again and press
5. The display shows
and press
IMPORTANT
If you change the PIN code, please keep a record of the new
number.
6.4

Dial mode

Your D4 is set to tone dialling. You should only need to
change this if connected to an older type of switchboard/PBX
which requires Pulse dialling.
m
1. Press
d
2. Scroll to
d
SETUP
, scroll to and press
m
PIN CODE
and press
RETYPE
. Re-enter the new PIN again
m
to confirm.
d
SETUP
, scroll to and press
m
DIAL MODE
and press
m
.
.
m
.
m
to confirm.
m
.
.
21