Eiki HDT700 Owner's Manual page 25

Crestron control
You can use Crestron RoomView® to monitor
and control the projector through the net-
work.
For more information, visit http://www.
crestron.com & www.crestron.com/getroom-
view.
Item Description
IP address ................ Control System IP Address
as a string. The default
value is blank.
IP ID .............................. Control System IP ID as a
string. The default value is
blank.
(from 3 to 254)
Port ............................... The default value is 41794.
(from 1 to 65535)
AMX D. D.
If your network environment uses an
AMX controller, select ON to allow the
projector to be detected by AMX Device
Discovery. (ON, OFF) For more details, visit
http://www.amx.com/.
Network configuration
25