• Do not use liquid or aerosol cleaners. Use a damp cloth moistened with water to clean the outside of your VTC AccuMic pad and power supply. Choosing a location • Do not use your VTC AccuMic near water. For example, do not use it near a VTC AccuMic Installation and Operation Manual...
• Avoid using your VTC AccuMic during an electrical storm. There can be a remote risk of electric shock from lightning. When to repair your VTC AccuMic Unplug your VTC AccuMic from the wall outlet and return it to ClearOne if any of the following conditions occur: V-There •...
Page 5
1. Disconnect the first VTC AccuMic from its electrical power source. 8-pin connector on the 4-way breakout cable. 2. Connect one end of a 10' (3 meter) mini-DIN VTC AccuMic cable (part 830- 3. Connect the DC Power jack to the Power Supply...
(with the same or a similar model, which may be a refurbished model) at ClearOne’s option, without charge for either parts or labor. ClearOne is not responsible for costs incurred in delivering or shipping your VTC AccuMic to or from the service site. All replaced equipment becomes the property of ClearOne.
Compliance FCC Rules Compliance The ClearOne VTC AccuMic has been tested and found to comply with the limits for a Class A digital device as specified in Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. The...
Page 8
ClearOne Communications, Inc. ~ 1825 Research Way, Salt Lake City, UT 84119 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107...