Troubleshooting Guide - DCS CE-PHFS-DW-BK-L Use And Care Manual

Troubleshooting
PROBLEM:
Pilot does not light
Can you Match light the
using the piezo
pilot?
lighter.
Piezo igniter problem. Is there a spark at the pilot
when the piezo is pressed?
YES
See lighting
instructions
igniter. Touch valve panel to safe-
Has the igniter wire insulation been
pinched, cut, or burnt away?
YES
Call customer service
for replacement pilot
assembly.
YES
NO
Remove valve panel, make sure
igniter wire is attached to piezo
ty valve cylinder to ground, and
try again. Is there a spark?
NO
NO
Replace piezo igniter.
call customer service for
replacement
17
Is there adequate gas supply
available?
YES
Is supply hose bent
Is gas cylinder full?
NO
Are lighting instruc-
tions being followed?
YES
Check pilot for blockage.
See page 15
NO
NO
or kinked?
YES
Straighten
hose