Speaker Setup; Remote Control Operation - Citizen C802DVD User Manual

Modes and Features Setup
3. HUE
VIDEO SETUP
BRIGHTNESS
+6
CONTRAST +4
+2
HUE
0
SATURATION
-2
SHARPNESS
-4
-6
EXIT SETUP
Press UP and DOWN to move the scroll and adjust the hue.
4. SATURTION
VIDEO SETUP
BRIGHTNESS
12
CONTRAST 10
8
HUE
6
SATURATION
4
SHARPNESS
2
0
EXIT SETUP
Press UP and DOWN to move the scroll and adjust the saturation.
5. SHARPNESS
VIDEO SETUP
BRIGHTNESS
CONTRAST
8
HUE
6
SATURATION
4
SHARPNESS
2
0
EXIT SETUP
Press UP and DOWN to move the scroll and adjust the sharpness.

Speaker Setup

SPEAKER SETUP
DOWNMIX
EXIT SETUP
Advanced Features
1. DOWINMIX
SPEAKER SETUP
DOWNMIX LT/RT
STEREO
VSS
EXIT SETUP
[LT/RT] -Choose this setting, it will be sound like in a movie theatre,if the
original movie the disc was recorded from was encoded in the
Pro Logic Dolby Digital format.
[STEREO] -Choose this setting,when 5.1- channel sound playing,two
channels of signals will be output from the left and right soundtrack;
when 2-channel sound playing,stereo signal will be output.
[VSS] - Choose this setting to output the v irtual urround ound s
left and right soundtrack.
Digital Setup
DIGITAL SETUP
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
1. DYNAMIC RANGE
DIGITAL SETUP
FULL
DYNAMIC RANGE
6/8
DUAL MONO
4/8
2/8
EXIT SETUP
OFF
Choose this setting to adjust the line out ratio and get different effect. If
adjusting to FULL,the audio signal peak value will be the minimum;while
adjusting to OFF,maximum.
Note: This optin will be validated when DOWNMIX set to 5.1CH.
2. DUAL MONO
DIGITAL SETUP
DYNAMIC RANGE
DUAL MONO STEREO
MONO L
EXIT SETUP MONO R
MIX MONO
Choose this option to setup the L and R mono output mode; There are four
modes in this option: STEREO, MONO L, MONO R, and MIX MONO.
It is mainly used in karaoke mode.
12

Remote Control Operation

POWER
During playback, press <POWER> to stop the player and
return to standby mode.
While the player is in standby, press <POWER> or any key
on the front panel to resume normal operation.
OPEN/CLOSE
To open the disc tray, press <OPEN/CLOSE>.
To close the disc tray, press <OPEN/CLOSE> again.
0-10+ keys
s from the
These keys are used to input the time, as well as title,
chapter and track numbers.
When a numeric item is displayed on the screen, press the
0-10+ keys to select the desired entry, And press <ENTER>
to confirm.
CLEAR
Press <CLEAR> to delete numbers you have selected.
Press once to delete one digit.
Press and hold to delete all digits.
PLAY
Press <PLAY> from stop mode to start playback.
Press <PLAY> during playback to replay the last 10 seconds.
This function is not available if the elapsed time of current
tracks less than 10 seconds.
Note: MP3 discs and some DVD discs do not have a 10 second
review feature.
PAUSE
Press <PAUSE> during playback to pause playback.
Press <PLAY> to resume normal playback.
STOP
Press <STOP> once during playback to stop and hold
playback.
Press <PLAY> to resume playback from the point you
pressed STOP.
Press <STOP> twice to stop playback completely.
Note:
The screen saver will automatically turn on if playback is
stopped about 3 Minutes (When Screen Saver is set to on).
SLOW
Press <SLOW> repeatedly to slow motion playback at
variable speeds: 1/2,1/3,1/4,1/5,1/6,1/7.
Advanced Features
OSD
Press <OSD> to display the infomations of the video disc
on the TV screen, including song information, broadcast
time, remain time, etc..
RETURN
Press <RETURN> to the main menu when PBC is on.
MUTE
Press <MUTE> to mute the Audio output.
Press <MUTE> again to resume normal audio output.
R/L
During CD/VCD/SVCD playback.
Press <R/L> to select a audio channel (STEREO,
MONO L, MONO R, AUTO L, AUTO R).
VOL+ VOL-
Press <VOL+> button to increase Volume.
Press <VOL-> button to reduce Volume t.
PBC
During VCD playback, press <PBC> (playback control) to
select PBC on and off.
SUBTITLE
During DVD playback, press <SUBTIT> repeatedly to
select from up to 32 subtitle languages.
Note: This function is disc specific (languages will vary).
LANGUAGE
During DVD playback, press <LANG> repeatedly to
select video languages.
Note: This function vary by the disc.
P-SCAN
During playback is stopped, press <P-SCAN> button twice
to switch to progressive scan mode, press <P-SCAN>
once to switch back to Interlace scan mode.
Note: If you connected the DVD player to your TV using the
component Video Output, you can use the <P-SCAN>
button to switch to progressive scan to superior
video quality.
13