Brinkmann 4 Burner Gas Grill Owner's Manual page 24

Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
CAUTION! Some parts may
contain sharp edges.
Wear protective
gloves if necessary.
Step 1
Attach cart base to side cart legs.
Insert four M6 X 12mm bolts
(silver) and star washers (silver)
through cart base and into legs
and tighten securely.
Step 2
Attach tank holder onto cart base by
using three M6 X 12mm bolts
(black).
Step 3
Attach front panel to legs using
four M6 X 12mm bolts (black) and
star washers (black). After fixed
front panel is attached, secure front
fixed panel support bar onto cart
base and fixed front panel by using
two M6 X 12mm bolts (black).
Support bar is labeled for proper
orientation.
Note:
With the help of a friend, turn
the cart assembly over. Try to
minimize the stress to the
legs.
Step 4
Press plastic feet onto bottom of left
side cart legs.
23