Digit Map - D-Link DVG-2102S User Manual

DVG-2102S User's Manual

3-2-1-6 Digit Map

Digit Map supports multiple dial plans which help users to arrange least cost route. Each Proxy Server has
individual dial plan which combines the original feature of Digit Map and Speed Dial. You can use "?" or "%"
in the column of Scan Code and VoIP Dial-out. "?" represents a single digit, and "%" represents a wildcard.
The function of the signs is to mapping the numbers between the number received from user and the
replaced or modified number for actual dial out. With this function, users can easily add certain leading
digits to replace a full set of numbers. There are 50 sets of leading digit entries to choose voice routing
interface.
ADVANCED → VoIP → Digit Map
Enable Pound Key ' # ' Function: Check the box to treat '# ' as a digit and send out with other numbers
when dialing. If you un-check the box and '# ' is pressed after dialing, it will speed up the phone number
detection of the VoIP Telephone Adapter.
Default Call Route: Select VoIP or Deny as the default call route for the calls.
Default VoIP Route Profile: Enter the Profile ID (ranging from 1-10) for the Default VoIP routing.
ADVANCED → VoIP → Digit Map
Scan Code: Enter the digits for the VoIP Telephone Adapter to scan while user is dialing.
VoIP Dial-out: Enter the actual dialing number rule for the VoIP Telephone Adapter to call through the
Internet.
User Dial Length: Enter the total number of digits that user dialed.
Route: Select VoIP or Deny for this entry.
VoIP Route Profile: Choose the proper Profile ID and click the VoIP Route Profile button to set the priority
of VoIP Route Profile.
D-Link Systems, Inc.
ADVANCED
38