Section 2: Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard.
Connect the Ethernet Cable
Using the provided Ethernet cable connect one end to your camera and the
other-end to your network.
To install the provided Ethernet cable see "Internal Ports" on page 8 for detailed
instructions.
Attach the External Power Supply
Attach the external power supply to the power receptor and to your wall outlet
or power strip.
To install the provided power supply see "Internal Ports" on page 8 for detailed
instructions.
1
Ethernet Cable
Use an RJ45 Ethernet cable to connect to your network
2
Power Cable
Power cable for the provided power adapter
D-Link DCS-6010L User Manual
Manual Hardware Installation
1
2
16