Specifications - Definitive Technology ProSub 800 Owner's Manual

Service
Service and warranty work on your Definitive loudspeakers will
normally be performed by your local Definitive Technology dealer.
If, however, you wish to return the speaker to us, please contact us first,
describing the problem and requesting authorization as well as the loca-
tion of the nearest factory service center. Please note that the address
given in this booklet is the address of our offices only. Under no
circumstances should loudspeakers be shipped to our offices or returned
without contacting us first and obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Drive, Suite K
Owings Mills, Maryland 21117
Phone: 410-363-7148
ProSub Specifications
ProSub 1000
Outer Dimensions:
Frequency Response:
Driver Complement:
Amplifier:
Speaker Level High-Pass Filter:
High-Level Low-Pass Filter:
Fuse Size:
ProSub 800
Outer Dimensions:
Frequency Response:
Driver Complement:
Amplifier:
Speaker Level High-Pass Filter:
High-Level Low-Pass Filter:
Fuse Size:
Specifications subject to change
12" W
X
17.9" D
X
14.4" H
18 Hz-1S0 Hz
One 10" woofer with polymer cone
coupled to one 10" infrasonic radiator
300-Watts RMS
6 db/octave (80 Hz)
24 db/octave continuously variable
(40 Hz - 150 Hz) plus unfiltered LFE
direct-coupled input
3.2 amp 250 volt slow-blow Littlefuse
313 type for the 110 volt version, and
2 amp 250 volt slow-blow BEL 5ET
type for the 240 volt version.
10.3" W
X
15.8" D x 12.9" H
20 Hz-150 Hz
One 8
il
woofer with polymer cone
coupled to one 8" infrasonic radiator
300-Watts RMS
6 db/octave (80 Hz)
24 db/octave continuously variable
(40 Hz -150 Hz) plus unfiltered LFE
direct-coupled input
3.2 amp 250 volt slow-blow Littlefuse
313 type for the 110 volt version, and
2 amp 250 volt slow-blow BEL SET
type for the 240 volt version.