Specifications - Definitive Technology PowerField ProSub 1000 Owner's Manual

Service
Service and warranty work on your Definitive loudspeakers will normally
be performed by your local Definitive Technology dealer. If, however, you
wish to return the speaker to us, please contact us first, describing the
problem and requesting authorization as well as the location of the nearest
factory service center. Please note that the address given in this booklet
is the address of our offices only. Under no circumstances should loud-
speakers be shipped to our offices or returned without contacting us first
and obtaining return authorization.
ProSub Specifications
ProSub 1000
Outer Dimensions:
Frequency Response:
Driver Complement:
Amplifier:
Speaker Level High-Pass Filter:
Low-Level Low-Pass Filter:
Fuse Size:
ProSub 800
Outer Dimensions:
Frequency Response:
Driver Complement:
Amplifier:
Speaker Level High-Pass Filter:
Low-Level Low-Pass Filter:
Fuse Size:
Specifications subject to change
Definitive Technology Offices
11433 Cronridge Drive, Suite K
Owings Mills, Maryland 21117
Phone: 410-363-7148
12
"
18 Hz – 150 kHz
One 10" woofer with polymer cone coupled to
one 10" infrasonic radiator
300-Watts RMS
6 db/octave (80 hz)
24 db/octave continuously variable
(40 hz – 150 hz) plus unfiltered LFE direct-
coupled input
3.2 amp 250 volt slow-blow Littlefuse 313
type for the 110 volt version, and 2 amp 250
volt slow-blow BEL 5ET type for the 240
volt version.
10.3
20 Hz – 150 kHz
One 8" woofer with polymer cone coupled to
one 8" infrasonic radiator
300-Watts RMS
6 db/octave (80 hz)
24 db/octave continuously variable
(40 hz – 150 hz) plus unfiltered LFE direct-
coupled input
3.2 amp 250 volt slow-blow Littlefuse 313
type for the 110 volt version, and 2 amp 250
volt slow-blow BEL 5ET type for the 240
volt version.
W 17.9 W 14.4
x " x "
W 15.8 W 12.9
" x " x
H
H
"
11