Storage; Replacement Parts And Accessories; Repair Service - Remington RM1632A Owner's Manual

STORAGE
Itstoling saw formole than 30 &_ys, f ollow stepsbelow.
1. Drain oil tank after each use.
2. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mixture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This will
prevent rust.
5. Wipe a thin coating ofoil over sin-theeof guide bar.
6. Wipe offoutside of
saw body.
Do this with softcloth
dgunpened witha mild soap and water _xtum.
7. Store chain saw
• in a high or locked place, out of chilcken's reach
• in a dry place
• in a canting case or with scabbardover guide Nu
REPLACEMENT PARTS AND
ACCESSORIES
WARNING: Use only replacement
parts and accessories described in this
manual. Use of other parts or accessories
could damage saw or injure operator.
For original replacement pal-tsand accessories, call
1-866-206-2707 (in Canada, call 1-877-696-5533)
or visit www.remingtonpowertools.com.
REPAIR SERVICE
Note: Only use original replacement parts. This will
protect your warranty coverage for parts replaced
under warranty.
For service, please call the Customer Support
Department to obtain a list of authorized service
dealers near you. Service on this unit, both within
and after the warranty period, should only be
per_brmed by an authorized and approved service
dealer.
Call 1-866-206-2707 (in Canada call 1-877-696-
5533) or visit www.remingtonpowertools.com.
18