Saw Chain Tension Adjustment - Remington RM1632A Owner's Manual

SAW CHAIN TENSION ADJUSTMENT
£k
WARNING: Unplug chain saw from
power source before adjusting saw
chain tension.
_k WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
='k
4Bk WARNING: Maintain proper chain
tension always. A loose chain will in-
crease the risk of kickback. AIoose chain
may jump out of guide bar groove. This
may injure operator and damage chain.
A loose chain will cause chain, guide bar,
and sprocket to wear rapidly.
iMPORTANT!
Failure to follow these instructions when tensioning
saw chain will damage saw and void the warranty.
New saw chains will stretch. Check chain tension
fiequently when first used and tighten when chain
becomes loose around guide bar.
if chain becomes loose around guide
bar, allow chain to cool then...
Loosen both nuts...
Model RMI632A
Turn chaintensioning screwclockwise
to tension saw chain o__r...
Turn chaintensioning knob clockwise
to tension saw chain...
Pull chain to check tension. Guide
links should not come out of guide
bar groove...
Make sure chain moves freely around
guide bar then tighten both nuts.
10