Safety And Instructional Decals - Toro Power Clear 38585 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
1. Cutting dismemberment, rotor blades hazard; do not place
your hand in the chute; remove the ignition key and read the
instructions before servicing or performing maintenance.
108-4930 (Model 38585 only)
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, rotor blades—stop
the engine before leaving
the machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Engine switch On
94-2577
108-4939
5. Engine switch Off
6. Primer
7. Push the primer three
times to prime the engine.
8. Read the Operator's
Manual before checking
engine oil level.
114-3753 (Model 38586 only)
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, rotor blades—stop the
engine before leaving the machine.
3. Thrown object hazard—keep bystanders a safe distance
from the machine.
4. Read the Operator's Manual before checking engine oil
level.
5. Engine switch On
6. Engine switch Off
7. Primer
8. Push the primer three times to prime the engine.
9. Plug the machine in to power the electric starter.
1. Choke
1. Hot surface (on exhaust baffle)
4
110-9363
114-3794