Operation - Intellitouch OHP 5000 User Manual

OHP 5000 User Manual

Operation

Playback
Playing Audio Stored in Memory
By default, the unit is always in "playback" mode. When unit is playing,
the LCD will display a running time and the segments on the speaker icon
will move.
Playback After Power Loss
If power to the unit is lost, the unit will resume playback as soon as power
is reapplied. The unit retains its recorded content after power loss.
Recording
Recording Single-Track CDs
1. Open cover
2. Insert CD
3. Close cover
OPERATION – Once cover is closed, the unit will automatically begin
recording the content of the track into the unit's digital memory. During
the recording process, the contents of what is being recorded to memory
will be heard through the speaker. Unit automatically switches over to
"playback" mode when recording is complete.
Recording Multi-Track CDs
1. Open cover
2. Insert CD
3. Close cover
4. Use the "track search" buttons to navigate to the desired track.
5. Press the SELECT button (to deselect a track, press SELECT button again)
6. Repeat steps 4 and 5 until you have selected all desired tracks or have
used the unit's available memory.
7. Press the REC button to begin recording.
OPERATION – Once "record" button is pressed, the unit will begin
recording the selected tracks into the unit's digital memory. During the
recording process, the audio being recorded to memory will be heard
through the speaker. Unit automatically switches over to "playback" mode
when recording is complete.
Previewing a track on a CD
1. Use buttons to navigate to a track
2. Press "PREVIEW" button to start preview
3. Press "PREVIEW" button again to stop preview
4