Intellitouch OHP 5000 User Manual page 3

OHP 5000 User Manual
Set-up
Connection to PBX or KEY phone systems
1 Plug AC adapter into wall outlet.
2 Plug AC adapter cable into jack marked "DC12V".
Plug "Connector Cable" to "AUDIO OUT" jack.
3
4 Plug other end of "Connector Cable" into phone system's music-on-hold
(moh) input jack. NOTE: If the jack cannot be located, contact phone
vendor for information.
Connection to Standard Analog or KSU-less Phones
For connection to standard analog or KSU-less phones, an MOH 500i
analog adapter module card is required.
The MOH 500i module card connects internally to the OHP 5000 and
provides music-on-hold capability to standard analog and KSU-less
phones. The MOH 500i interconnection cables are accessed by removing
the steel plate on the rear panel.
For specific connection information, please see instructions included with
the MOH 500i.
music-on-hold
input
2
PBX or Key
System