Clearing Jammed Staples - Grizzly H7678 Instruction Manual

Clearing Jammed
Staples
A jammed staple must be cleared before
using the stapler again.
To clear a jammed staple from the dis-
charge area:
1. DISCONNECT STAPLER FROM THE
AIR SUPPLY!
2.
Unlock the catch lever and slide the
magazine pusher all the way back.
3.
Remove the staple stick from the mag-
azine.
4. Flip the quick release latch as shown in
Figure 6 and open the cover.
Quick
Release
Latch
Figure 6. Area to remove jammed staple.
-10
-
Cover
5. The jammed staple should now be vis-
ible; remove it from the discharge area
with needle nose pliers.
6. Secure the quick release latch.
7. Inspect the staple stick. If it is bent
or damaged, throw it away and insert
a new stick that only contains clean,
undamaged staples. DO NOT use dirty
or damaged staples!
8. Slide the magazine forward until the
catch lever engages.
H7678 18 Gauge Deep Stapler Kit