Summary of Contents for Reebok TOMAHAWK CEX1006ST.0
Page 1
Model No. CEX1006ST.0 Serial No. The serial number is found in the location shown below. Write the serial number in the space above for future reference. Serial Number Decal UESTIONS? At FreeMotion Fitness, we’re committed to providing complete customer satisfaction.
Page 2
REEBOK and the vector logo are registered trademarks and service marks of Reebok. Manufactured and used under license from Reebok. SPD ® is a registered trademark of Shimano, Inc. TOMAHAWK is a registered trademark of Cytech, GmbH.
MPORTANT RECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions and information before operating the indoor studio cycle. 1. It is the responsibility of the owner to ensure 11. The indoor studio cycle does not have a free- that all users of the indoor studio cycle are wheel;...
EFORE EGIN Congratulations for selecting the new REEBOK ® IMPORTANT: Read this manual carefully before as- TOMAHAWK indoor studio cycle. The REEBOK sembling or using the indoor studio cycle. If you TOMAHAWK indoor studio cycle offers an impressive have questions after reading this manual, see HOW array of features designed to enhance cardiovascular TO CONTACT CUSTOMER CARE on the back cover fitness, tone muscles, and develop endurance.
OW TO SSEMBLE THE NDOOR TUDIO YCLE Due to the weight of the indoor studio cycle, it is recommended that two persons assemble it. Set the in- door studio cycle in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed.
Page 7
3. Remove the two M6 x 30mm Union Bolts (54) and the two packing spacers (not shown) from the front of the Frame (1). Discard the packing spacers. Attach a Wheel (50) to one side of the Frame (1) with an M6 x 30mm Union Bolt (54) and two M5 Washers (66) as shown.
Page 8
6. Turn the front Adjustment Knob (44) counterclock- wise one half of a turn. Pull the Adjustment Knob and insert the Handlebar Post (6) into the Frame (1). Slide the Handlebar Post to the desired height, release the Adjustment Knob, and move the Handlebar Post up or down slightly until the Adjustment Knob snaps into one of the adjustment holes in the Handlebar Post.
Page 9
9. The Water Bottle Holder (not shown) can be at- tached to the indoor studio cycle in any of the three locations indicated by the arrows at the right. Attach the Water Bottle Holder in the desired loca- tion with the two M5 x 15mm Screws (68). 10.
OW TO DJUST THE NDOOR TUDIO YCLE The indoor studio cycle can be adjusted for maximum turn, pull the adjustment knob, slide the saddle post up comfort and exercise effectiveness. The instructions or down, and then release the adjustment knob. Move below describe one approach to adjusting the indoor the saddle post up or down slightly to ensure that the studio cycle;...
HANDLEBAR ADJUSTMENT RESISTANCE ADJUSTMENT Begin with the top of the handlebars at the same height You can regulate as the top of the saddle (see the drawing below). If the resistance of Resistance your knees touch the handlebars or if you experience the braking sys- Knob back discomfort while pedaling for extended periods of...
REVENTIVE AINTENANCE Regular maintenance must be performed on the indoor studio cycle for optimal performance and longevity. Please read and follow all instructions below. If the indoor studio cycle is not maintained as described, components may wear excessively and the indoor studio cycle may become damaged. If you have questions about maintenance, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual.
Page 13
3. To maintain the easy adjustability of the saddle post, the saddle post should be cleaned and lubricated. Turn the rear adjustment knob counterclockwise one half of a turn, pull Saddle the adjustment knob, and slide the saddle post out of the frame. Apply a Carriage small amount of CRC Food Grade Silicone maintenance spray to a lint- free cloth and clean the saddle post.
MONTHLY MAINTENANCE 1. To maintain the easy adjustability of the adjustment knobs and the ad- justment handles, the threads on the adjustment knobs and the adjust- ment handles should be lubricated. Adjustment First, turn the front adjustment knob and the front adjustment handle Handle counterclockwise about eight full turns.
Page 15
4. Check the chain for proper lubrication. To do this, first remove the four screws from the right side of the chain guard. Next, remove the screw Chain Inner from the left side of the inner chain guard. Then, remove the outer chain Guard Chain guard.
IMITED ARRANTY Limited Warranty on Commercial Equipment FreeMotion Fitness, Inc. warrants that all new equipment will be free of manufacturing defects in workmanship and materials, becoming effective on the date of original installation. Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only.
Page 17
Receipt of Parts Simply call Customer Care toll-free at 1-800-201-2109, Monday through Friday, 8 a.m. to 5 p.m. Mountain Time, and give your name, address, and the serial number of your Product. A representative will tell you how to get a replacement part.
FreeMotion Fitness, Inc., 1096 Elkton Drive, Suite 600, Colorado Springs, CO 80907 When contacting Customer Care, please be prepared to provide the following information: • the MODEL NUMBER of the product (CEX1006ST.0) • the NAME of the product (REEBOK ®...
Need help?
Do you have a question about the TOMAHAWK CEX1006ST.0 and is the answer not in the manual?
Questions and answers