Setting Up The Player - Harman Kardon BDT 3 Owner's Manual

BDT 3/BDT 30

Setting Up the Player

NOTE: The menu screens shown in this manual are for illustrative purposes and may
differ somewhat from the actual displays.
To set up your BDT 3/BDT 30, you will use the remote to navigate through all of the on-
screen menus and make selections from them.
• Use the Cursor Up/Down buttons to navigate through the menu list. When an item
is highlighted, a border will appear around it.
• To select a highlighted item, press the OK button. The screen will change
depending on your selection.
• To return to the previous screen, press the Exit button.
Setup Wizard
When you turn your BDT 3/BDT 30 on for the first time, the on-screen menu will display
the Setup Wizard.
Page: 1/5
Welcome to the Harman Kardon BDT Setup
Wizard.
Some simple information is needed to ensure
you get the best experience from your product.
You can adjust these settings later in addition
to making changes to more advanced settings
by pressing the 'Settings' button on the
remote.
Before you can use your BDT 3/BDT 30, you need to set the language and make a few
basic settings so that the player's video output will work properly with your TV. Press the
OK button and the Wizard's language screen will appear.
Page: 2/5
Please select which language you
would like the BDT menus to appear.
Previous
After setting the language you want the on-screen menus to use, press the OK button,
and the Wizard's TV-resolution screen will appear.
After selecting your TV's highest resolution, press the OK button, and the Wizard's
aspect-ratio screen will appear. If you're unsure of your TV's highest resolution, select
Setup Wizard
"Auto," and the player will automatically select the optimal resolution.
Next
OK
After selecting the aspect ratio that best fits your TV, press the OK button to save your
setting, and then press it again to exit the Setup Wizard. For more information on aspect
Setup Wizard
ratios, see Aspect Ratio, on page 13.
Next
OK
Page: 3/5
Please select the highest resolution that your
TV supports. If you are unsure, select "Auto."
Upon making a selection the screen will be
changed to the chosen resolution. You will be
presented with the option to continue with the
new resolution or "Cancel" to return to the
previous resolution. If the screen remains
blank, please wait 15 seconds without
pressing anything and the system will
automatically return to the previous resolution.
Previous
Page: 4/5
Please select the best aspect ratio
that fits your TV.
Previous
Setting Up the Player
Setup Wizard
Auto
480i/576i
480p/576p
720p
1080i
1080p
Next
OK
Setup Wizard
16:9 Full
16:9 Normal
4:3 Pan & Scan
4:3 Letterbox
Next
OK
11