Quick Start - FlyTech POS 112 SERIES User Manual

2.5 Quick Start

To attach your POS112 LCD monitor to your PC system, follow these
instructions:
1. Turn off the power of your computer.
2. Choose the appropriate type of VGA cable for the desired PC system
for the PC :Connect the 15-pin high d ensity D-SUB connector of the
appropriate signal cable to the connector of the display card in your
system (Figure 2.5A). Tighten all screws.
3. Attach and connect the 15-pin mini D-SUB of the VGA cable and the
AC Adapter cable.
NOTE: Incorrect cable connections may result in irregular operation,
damage the LCD module and shorten the module's life.
4. Connect one end of the power cord to the AC Adapter and the other
end to the power outlet (Figure 2.5B).
Figure 2.5A
10