Chapter
Getting Started
2.1 Setup
This chapter explains on how to set up your hardware. For adjustment of
display, please see the next chapter for On-Screen Display (OSD).
2.2 Precautions for Setup
This section describes the important steps when setting up the POS 112.
In addition to the above, observation on the warning instructions and
precautions are necessary at each work stage.
given with an explanation.
ê CAUTION
1. Be sure to turn off the power of all equipment including the POS 112 and
it's peripherals before setup. Otherwise, the peripherals units may be
damaged during setup.
2. Before setup, be sure to discharge the static electricity on your body.
Defects may result on the product if you do not allow static electricity to
discharge.
surface to allow static electricity to discharge.
3. Do not touch the connectors with your fingers, to prevent the dirt residue
from causing malfunction.
2
Find and touch your body (hand) to a grounded metal
These instructions are
5