Installing The Mcr Module (Option) - FlyTech POS 112 SERIES User Manual

2.4 Installing the MCR Module (option)

2.4.1 Installing the MCR Module
The LCD module and touchscreen are equipped with an interface for a
connection to a Magnetic Card Reader (MCR).
Mount the MCR module by following the procedure described below.
1. Open the MCR module on the package and check it.
MCR Module (option)
2. Connect the MCR module to the right side of LCD module and lock it
using two screws.
Lock screws
2.4.2 Removing an MCR module:
To remove the MCR module, reverse the installation steps.
! NOTE: When you remove the screws and then want to fix them again,
first turn off the power.
9