Mitutoyo Measuring Projector User Manual page 37

4. Move the cross-travel stage along the Y-axis (back and forth), and align the edge of the
reference piece with the horizontal cross-hair line.
5. Move the cross-travel stage along the X-axis (left and right), and confirm that the edge
of the reference piece is aligned with the horizontal cross-hair line over the entire length
of stage X-axis travel.
Reference piece
If a deviation from the horizontal cross-hair lines is observed, refer to 2.5 Adjustment for
•
remedy.
2 - 22
Cross-hair line
( )
horizontal
Projection screen
No.99MBA043A