Visitor At The Door; Incoming Calls; Outgoing Calls - Alcatel Temporis IP80 User Manual

3. Visitor at the door

3.1.

Incoming calls

Incoming calls from IPBX or SIP phone towards Temporis IP80 are authorized. When there is an
incoming call, Temporis IP80 will ring (1 to 5 times) depending on what has been programmed in
« Time parameters » section (§4.9).
Call is answered automatically. Thus the caller is able to talk and trigger the relays.
3.2.

Outgoing calls

As soon as user presses the button Temporis IP80 initiates a call to a pre-set dial up number.
Temporis IP80 button is associated to 2 different dial-up numbers (see §4.10), and can be
configured to work in two different modes:
Main/Backup mode: if the main destination number is busy or the call is rejected,
Temporis IP80 will call the backup number saved in §4.10.
Day/night mode: Temporis IP80 will dial the number programmed in §4.10 which
corresponds to the current active mode-either day or night.
Once the call is launched called party device will ring. Called party can answer the call, have a
conversation and trigger the relays.
Call duration is limited by Temporis IP80 to 2 minutes by default. 10 seconds before the end,
Temporis IP80 generates a beep. The conversation can be extended by dialling * or # from the SIP
device.
Temporis IP80 User's guide V1.0 Page 9