Poe Or Power Supply; Relay Connection; Acoustic Settings - Alcatel Temporis IP80 User Manual

2.3.

PoE or Power Supply

Temporis IP80 works either with the PoE power from the switch or with an external AC or DC
power supply. The voltage must rate between 10 to 14V, the electric current doesn't exceed
300mA.
2.4.

Relay Connection

Relay connection is shown on picture 2. Where
NO indicates the contact which is normally open (in idle)
COM indicates the common contact (middle)
NC indicates the contact which is normally closed (in idle)
The contacts in both switches are galvanically insulated from each other and from the circuits.
2.5.

Acoustic settings

Trimmers positions are settled in factory and in most cases will not need to be changed.
Basic position, direction of rotation and meaning of the trimmers are illustrated on picture 3.
Temporis IP80 User's guide
Picture 2. Examples of relays connections
Picture 3. Trimmer Setting
V1.0 Page 5