Table of Contents
Advertisement
4.9.
Time parameters
1: Maximum call duration before Temporis IP80 hangs up automatically. 10 seconds before
hanging-up, Temporis IP80 generates a beep. It's possible to extend the call duration by pressing
* or # (depending on the configuration, see §4.4).
2: When calls from IPBX to Temporis IP80 are authorised, you can set the number rings before
Temporis IP80 picks-up the call. The number of rings can be set from 1 to 9.
3: Time (sec) Temporis IP80 will hang-up before redialling when the called party is busy (range
[1-5]).
4: Time (sec) Temporis IP80 will stay in calling mode (hear the ring back tone) before hanging-on
then redialing, when the called party doesn't answer (range [10-99]).
5: Enable/disable the acoustic signalling of pick-up and hang-on actions.
6: Enable/disable the acoustic signalling of other actions, like relay activation,...
Temporis IP80 User's guide
1
2
5
6
V1.0
3
4
Page 16
Hide quick links:
Advertisement
Table of Contents
