Removing Breakdowns - Sinclair CFO-12E User Manual

Maintenance

Removing breakdowns

If a condition listed below occurs, please check the following items to help you to save
your time and cost.
Condition
The unit does not
operate.
Cause
Has the power supply cord been
disconnected?
Is the " " lamp blinking?(The
tank is full or in a wrong position.)
Is the temperature of the room
above 38 or below 2 .
- 14 -
What to do
Plug the power supply cord into the
outlet.
Discard the water in the drainage
tank, and then reposition the tank.
The protection device is actuated and the
unit can not be started in case operation
is under the bad environment (in that
case,please do not use the dehumidifier).