Operation - Danby DWC823BL-SC Owner's Manual

Control Buttons
Cooler (-1ºC/ºF)
This button decreases the set temperature.
Warmer (+1ºC/ºF)
This button increases the set temperature.
Celsius and Fahrenheit
ºC means degrees Celsius and ºF means
degrees Fahrenheit.
Light
This button turns the interior light on or off.
Setting the Temperature
The temperature can be set between 10ºC and 18ºC
(50ºF and 64ºF):
• To increase the set temperature, press the Warmer
button until you
temperature
NOTE: When changing the temperature the present
set temperature flashes in the LCD display. Press the
Cooler or Warmer button to change the set
temperature. After a few seconds the set temperature
stops flashing, and the display resumes showing the
actual temperature inside the wine cooler.
• To decrease the set temperature, tap the Cooler
button until you
temperature.
O P E R A T I O N
reach your desired
reach the desired
Changing Between ºC and ºF
• To change between °C (Celsius) to °F (Fahrenheit),
press the ºC/ºF button once.
Turning the Light On or Off
You can set your display light to be continuously lit, or lit
only when the door is open. To adjust the light setting:
• Press the Light button once to change the light
setting.
Wine should be loaded with corks facing the door. This
wine cooler is designed to hold no more than 8
standard 750ml wine bottles. Load the wine cooler as
follows:
• Load up to 4 bottles per rack
• Load up to 4 bottles on the base of the wine
cooler.
4
Loading