Controls & Connectors; Pwr Switch; Lamp Switch; Monitor Switch - Yaesu VXA-100 Operating Manual

C & C
ONTROLS ONNECTORS

PWR Switch

This is the main On/Off switch for the transceiver.
Press and hold in this switch for ½ second to turn
the radio on. When the radio is on, press and hold
in this switch for 2 seconds to turn the radio off.

LAMP Switch

Press this switch momentarily, to activate the
back-lighting lamp for the display and keypad
keys. Press and hold this switch for 2 seconds, to
activate the back-lighting lamp continuously. To
turn the lamp off, press this switch again. The
LAMP switch may be configured in several ways
via the Menu; see page 34 for details.

MONITOR Switch

This button may be pressed to "open" the squelch
manually, allowing you to listen for very weak
signals. Press and hold this button for 2 seconds,
to "open" the squelch continuously. Press this
button again to resume normal (quiet) monitor-
ing. See page 10.
PTT ( P ) Switch
T T
USH O ALK
Press this button to transmit when you are oper-
ating in the COM band. Release this button to
return to the "R " mode. See page 13.
ECEIVE
2
VXA-100 A P O M
VIATOR ILOT PERATING ANUAL